+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.51 per piece.
6205 Z · 25 × 52 × 15

Deep groove ball · 6205 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6205 Z: ⌀25 × ⌀52 × 15 mm⌀52⌀25156205 ZZ
    Fig. 1: 6205 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6205 Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6205 Z

    €0.62per piece incl. VAT
    In stock: 285 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 79 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    Zshield, one side
    Clearance
    normal clearance
    C
    14.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.8 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.13 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 15 from other brands

    83 products
    Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mm
    You are viewingCT 6205 Z
    €0.62baseline for the price comparison

    Everything the number specifies matches: series 62, 25 × 52 × 15 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mm6205 ZThis bearingCT25 × 52 × 15285 pcs€0.62you are here
    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mm6205 ZGPZ25 × 52 × 15out of stockon request
    • Cross-section drawing to size: Deep groove ball, 25 × 52 × 15 mm6205 ZKG25 × 52 × 15available to orderon request

    Under the price: the difference from the price of this bearing (€0.62).
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø52, seal 25×52

    6 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.397,720 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 5 assemblies · 14 pcs per machine

      ours: shield on one side; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    2. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    3. Maschio Tigre (disc harrow) Maschio Gaspardo same geometry 1 assembly

      ours: shield on one side; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: maschio_tigre-2016

    4. Maschio U/​UL/​Cobra (rotary tiller) Maschio Gaspardo same geometry 1 assembly

      ours: shield on one side; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: maschio_u-ul-cobra-2006

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 3 assemblies · 4 pcs per machine

      the machine has S17; ours does not; ours: shield on one side; in the machine: seals on both sides (2RS); not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (60205) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 52d 25B 15
    d×D×Bsize 25 × 52 × 15mm
    Cdynamic 14.8kN
    C0static 7.8kN
    mweight 0.13kg

    Deep groove ball bearing 6205-Z, design Z: shield on one side. Under GOST the same bearing is designated 60205.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60205?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0205 corresponds to the ISO base 6205. Size 25 × 52 × 15 mm, a full equivalent of 6205-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet