+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6201 Z · 12 × 32 × 10

Deep groove ball · 6201 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6201 Z: ⌀12 × ⌀32 × 10 mm⌀32⌀12106201 ZZ
    Fig. 1: 6201 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6201 Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6201 Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 61 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    Zshield, one side
    Clearance
    normal clearance
    C
    7.28 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.1 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.037 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 32 × 10 from other brands

    63 products
    Cross-section drawing to size: Deep groove ball, 12 × 32 × 10 mm
    You are viewingCT 6201 Z

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6201 2RS6201 2RScontact seals on both sidesCT12 × 32 × 1049,060 pcs€0.29
    • Photo: 6201 2RS C36201 2RS C3contact seals on both sides, clearance C3CT12 × 32 × 1014,612 pcs€0.36
    • Drawing: SS 6201 2RSSS 6201 2RScontact seals on both sides, stainless steelCT12 × 32 × 1064 pcs€0.87
    • Photo: 6201 2RS6201 2RScontact seals on both sidesKoyo12 × 32 × 10203 pcs€2.49
    • Photo: 6201 2RS C36201 2RS C3contact seals on both sides, clearance C3Koyo12 × 32 × 1030 pcs€2.50
    • Series illustration (not a photo of this item): 6201-2RSH6201-2RSHcontact seals on both sidesSKF12 × 32 × 102,359 pcs€2.76
    • Photo: 6201 2RS6201 2RScontact seals on both sidesKLT12 × 32 × 10available to order€0.24
    • Series illustration (not a photo of this item): 6201 2RS6201 2RScontact seals on both sidesNTE12 × 32 × 10available to order€0.44
    • Photo: 6201 2RS6201 2RScontact seals on both sidesZ&S12 × 32 × 10available to order€0.61
    • Photo: 6201 2RS C36201 2RS C3contact seals on both sides, clearance C3Z&S12 × 32 × 10available to order€0.86
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø32, seal 12×32

    4 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.211,410 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 1 assembly · 2 pcs per machine

      ours: shield on one side; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    2. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 1 pcs per machine

      ours: shield on one side; in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (60201) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 32d 12B 10
    d×D×Bsize 12 × 32 × 10mm
    Cdynamic 7.28kN
    C0static 3.1kN
    mweight 0.037kg

    Deep groove ball bearing 6201-Z, design Z: shield on one side. Under GOST the same bearing is designated 60201.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60201?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0201 corresponds to the ISO base 6201. Size 12 × 32 × 10 mm, a full equivalent of 6201-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet