+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.30 per piece.
6200 ZZ · 10 × 30 × 9

Deep groove ball · 6200 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6200 ZZ: ⌀10 × ⌀30 × 9 mm6200 ZZZZ
    Fig. 1: 6200 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6200 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6200 ZZ

    €0.36per piece incl. VAT
    In stock: 14,864 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 28 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    30 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    5.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.36 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.032 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 10 × 30 × 9 from other brands

    35 products
    Series illustration (not a photo of this item): 6200 ZZ
    You are viewingCT 6200 ZZ
    €0.36baseline for the price comparison

    Everything the number specifies matches: series 62, 10 × 30 × 9 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6200 ZZ6200 ZZThis bearingCT10 × 30 × 914,864 pcs€0.36you are here
    • Series illustration (not a photo of this item): 6200 ZZ6200 ZZNTE10 × 30 × 9180 pcs€0.42+€0.06
    • Series illustration (not a photo of this item): 6200-2Z6200-2ZSKF10 × 30 × 9502 pcs€2.35+€1.99
    • Photo: 6200 ZZ6200 ZZZ&S10 × 30 × 9available to order€0.68+€0.32
    • Series illustration (not a photo of this item): 6200 ZZ6200 ZZno brand10 × 30 × 9available to orderon request
    • Series illustration (not a photo of this item): 6200 ZZ6200 ZZISB10 × 30 × 9available to orderon request
    • Series illustration (not a photo of this item): 6200 ZZ6200 ZZKG10 × 30 × 9available to orderon request

    Under the price: the difference from the price of this bearing (€0.36).
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø30, seal 10×30

    4 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø30CT SEG 30 W by 1000Why it fits: DIN 472 snap ring for a 30 bore: holds the outer ring in the housing
      €29.25available to order
    • Seal 10×30JULU 010-30-10 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 10×30JULU 010-30-7 TCWhy it fits: Oil seal 10×30: shaft 10 and housing bore 30, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 30d 10B 9
    d×D×Bsize 10 × 30 × 9mm
    Cdynamic 5.4kN
    C0static 2.36kN
    mweight 0.032kg

    Deep groove ball bearing 6200-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80200.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80200?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0200 corresponds to the ISO base 6200. Size 10 × 30 × 9 mm, a full equivalent of 6200-ZZ.

    Will 6200 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet