+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61915 2RS · 75 × 105 × 16

Deep groove ball · 61915 2RS

radial — mediumaxial — low, on both sides
    Drawing of 61915 2RS: ⌀75 × ⌀105 × 16 mm61915 2RS2RS
    Fig. 1: 61915 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61915 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 61915 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 6 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    105 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    24.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    19.3 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.37 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 105 × 16 from other brands

    10 products
    Series illustration (not a photo of this item): 61915 2RS
    You are viewingCT 61915 2RS

    Everything the number specifies matches: series 619, 75 × 105 × 16 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 61915 2RS61915 2RSThis bearingCT75 × 105 × 16available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6915 / 61915 2RS6915 / 61915 2RSCT75 × 105 × 16169 pcs€4.50
    • Series illustration (not a photo of this item): 6915 2RS6915 2RSno brand75 × 105 × 16available to orderon request
    02

    Often bought with this

    bore snap ring Ø105, seal 75×105

    2 products
    • Bore snap ring Ø105CT SEG 105 W by 100Why it fits: DIN 472 snap ring for a 105 bore: holds the outer ring in the housing
      €51.474 pcs
    • Seal 75×105JULU 075-105-10 TCWhy it fits: Oil seal 75×105: shaft 75 and housing bore 105, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.93available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 105d 75B 16
    d×D×Bsize 75 × 105 × 16mm
    Cdynamic 24.2kN
    C0static 19.3kN
    mweight 0.37kg

    Deep groove ball bearing 61915-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet