+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
60309 · 45 × 100 × 25

Deep groove ball · 60309 (6309 Z)

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 60309 (6309 Z): ⌀45 × ⌀100 × 25 mm⌀100⌀452560309 (6309 Z)Z
    Fig. 1: 60309 (6309 Z), simplified drawing per ISO 8826-1; GOST number = ISO 6309 Z, dimensions from the GOST↔ISO table CX p.784. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 60309

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 60309

    Supplier’s set and note: (6309 Z)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 60 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    25 mm
    Width BRing width. Source: supplier data
    Seal
    Zshield, one side
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 100 × 25 from other brands

    63 products
    Cross-section drawing to size: Deep groove ball, 45 × 100 × 25 mm
    You are viewingCT 60309

    Everything the number specifies matches: series 63, 45 × 100 × 25 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Deep groove ball, 45 × 100 × 25 mm60309 (6309 Z)This bearingCT45 × 100 × 25available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6309 Z6309 ZCT45 × 100 × 25available to orderon request
    • Series illustration (not a photo of this item): 6309 Z6309 ZKG45 × 100 × 25available to orderon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø100, seal 45×100

    3 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 45×100JULU 045-100-10 TCWhy it fits: Oil seal 45×100: shaft 45 and housing bore 100, the same as the bearing; the bearing has its own seals (Z), and the oil seal closes the unit from outside
      €0.93available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 45B 25
    d×D×Bsize 45 × 100 × 25mm

    Deep groove ball bearing 6309-Z, design Z: shield on one side. Under GOST the same bearing is designated 60309.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60309?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0309 corresponds to the ISO base 6309. Size 45 × 100 × 25 mm, a full equivalent of 6309-Z.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet