+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.00 per piece.
6021 2RS · 105 × 160 × 26

Deep groove ball · 6021 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6021 2RS: ⌀105 × ⌀160 × 26 mm6021 2RS2RS
    Fig. 1: 6021 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6021 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6021 2RS

    €9.68per piece incl. VAT
    In stock: 5 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 4 approximate
    d
    105 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    26 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    76.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    65.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 105 × 160 × 26 from other brands

    9 products
    Series illustration (not a photo of this item): 6021 2RS
    You are viewingCT 6021 2RS
    €9.68baseline for the price comparison

    Everything the number specifies matches: series 60, 105 × 160 × 26 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6021 2RS6021 2RSThis bearingCT105 × 160 × 265 pcs€9.68you are here
    • Series illustration (not a photo of this item): 6021 2RS6021 2RSno brand105 × 160 × 26available to orderon request
    • Series illustration (not a photo of this item): 6021-2RS16021-2RS1SKF105 × 160 × 26available to orderon request

    Under the price: the difference from the price of this bearing (€9.68).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 160d 105B 26
    d×D×Bsize 105 × 160 × 26mm
    Cdynamic 76.1kN
    C0static 65.5kN
    mweight 1.6kg

    Deep groove ball bearing 6021-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180121.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180121?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0121 corresponds to the ISO base 6021. Size 105 × 160 × 26 mm, a full equivalent of 6021-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet