+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.47 per piece.
6015 ZZ · 75 × 115 × 20

Deep groove ball · 6015 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6015 ZZ: ⌀75 × ⌀115 × 20 mm6015 ZZZZ
    Fig. 1: 6015 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6015 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6015 ZZ

    €5.41per piece incl. VAT
    In stock: 116 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    5 exact, 21 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    115 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    41.6 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    33.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.64 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 115 × 20 from other brands

    26 products
    Series illustration (not a photo of this item): 6015 ZZ
    You are viewingCT 6015 ZZ
    €5.41baseline for the price comparison

    Everything the number specifies matches: series 60, 75 × 115 × 20 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6015 ZZ6015 ZZThis bearingCT75 × 115 × 20116 pcs€5.41you are here
    • Series illustration (not a photo of this item): 6015 ZZ6015 ZZNTE75 × 115 × 20available to order€5.69+€0.28
    • Photo: 6015 ZZ6015 ZZZ&S75 × 115 × 20available to order€10.06+€4.65
    • Series illustration (not a photo of this item): 6015 ZZ6015 ZZKG75 × 115 × 20available to orderon request
    • Series illustration (not a photo of this item): 6015 2Z6015 2ZSKF75 × 115 × 20available to orderon request

    Under the price: the difference from the price of this bearing (€5.41).
    02

    Often bought with this

    bore snap ring Ø115, seal 75×115

    2 products
    • Bore snap ring Ø115CT SEG 115 W by 100Why it fits: DIN 472 snap ring for a 115 bore: holds the outer ring in the housing
      €61.771 pcs
    • Seal 75×115JULU 075-115-10 TCWhy it fits: Oil seal 75×115: shaft 75 and housing bore 115, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €1.08109 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    12 machines2 makesby parts catalogues

    1. T-150-05-09-25, KhTZ-181 KhTZ same geometry 3 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: Tractors T-150-05-09-25 and KhTZ-181. Operator’s manual

    2. KhTZ-16131, KhTZ-16331 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    3. KhTZ-17021, KhTZ-17221 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    4. KhTZ-242K.20 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    5. KhTZ-243K.20 KhTZ same geometry 2 assemblies · 8 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    Number in the manufacturer’s catalogue: by GOST (80115) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 115d 75B 20
    d×D×Bsize 75 × 115 × 20mm
    Cdynamic 41.6kN
    C0static 33.5kN
    mweight 0.64kg

    Deep groove ball bearing 6015-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80115.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80115?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0115 corresponds to the ISO base 6015. Size 75 × 115 × 20 mm, a full equivalent of 6015-ZZ.

    Will 6015 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet