+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6003 C3 · 17 × 35 × 10

Deep groove ball · 6003 C3

radial — mediumaxial — low, on both sides
    Drawing of 6003 C3: ⌀17 × ⌀35 × 10 mm6003 C3
    Fig. 1: 6003 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6003 C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6003 C3

    Price on request
    In stock: 1,000 pcs
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 48 approximate
    d
    17 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    6.37 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.25 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.039 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 17 × 35 × 10 from other brands

    49 products
    Series illustration (not a photo of this item): 6003 C3
    You are viewingCT 6003 C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6003 2RS6003 2RScontact seals on both sides, normal clearanceCT17 × 35 × 105,753 pcs€0.44
    • Series illustration (not a photo of this item): 6003 2RS6003 2RScontact seals on both sides, normal clearanceNTE17 × 35 × 10260 pcs€0.54
    • Drawing: SS 6003 2RSSS 6003 2RScontact seals on both sides, normal clearance, stainless steelCT17 × 35 × 101,930 pcs€1.26
    • Cross-section drawing to size: Deep groove ball, 17 × 35 × 10 mm6003-2NSE9contact seals on both sides, 9: not decodedNACHI17 × 35 × 10130 pcs€2.49
    • Series illustration (not a photo of this item): 6003 2RS6003 2RScontact seals on both sides, normal clearanceKoyo17 × 35 × 1050 pcs€2.98
    • Series illustration (not a photo of this item): 6003 2RS C36003 2RS C3contact seals on both sidesKoyo17 × 35 × 1064 pcs€2.98
    • Photo: 6003 2RS6003 2RScontact seals on both sides, normal clearanceKLT17 × 35 × 10available to order€0.33
    • Photo: 6003 2RS6003 2RScontact seals on both sides, normal clearanceZ&S17 × 35 × 10available to order€0.97
    • Photo: 6003-2RSH/C36003-2RSH/C3contact seals on both sidesSKF17 × 35 × 10available to order€2.90
    • Photo: 6003-2RSH6003-2RSHcontact seals on both sides, normal clearanceSKF17 × 35 × 10available to order€3.25
    02

    Often bought with this

    seal 17×35, shaft snap ring Ø17, bore snap ring Ø35

    6 products
    • Seal 17×35JULU 017-35-7 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing
      €0.22600 pcs
    • Seal 17×35JULU 017-35-10 TCWhy it fits: Oil seal 17×35: shaft 17 and housing bore 35, the same as the bearing
      €0.24145 pcs
    • Shaft snap ring Ø17CT SEG 17 Z by1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      €11.51available to order
    • Shaft snap ring Ø17SEG 17 Z by 1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. VBP 2160 (baler) Kuhn same geometry 1 assembly · 4 pcs per machine

      ours: open; in the machine: seals on both sides (2RS); ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 35d 17B 10
    d×D×Bsize 17 × 35 × 10mm
    Cdynamic 6.37kN
    C0static 3.25kN
    mweight 0.039kg

    Deep groove ball bearing 6003 C3.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet