+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6001 ZZ C3 · 12 × 28 × 8

Deep groove ball · 6001 ZZ C3

radial — mediumaxial — low, on both sides
    Drawing of 6001 ZZ C3: ⌀12 × ⌀28 × 8 mm6001 ZZ C3ZZ
    Fig. 1: 6001 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6001 ZZ C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6001 ZZ C3

    Price on request
    In stock: 200 pcs
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 43 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    28 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    C3
    C
    5.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.36 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.022 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 28 × 8 from other brands

    48 products
    Series illustration (not a photo of this item): 6001 ZZ C3
    You are viewingCT 6001 ZZ C3

    Everything the number specifies matches: series 60, 12 × 28 × 8 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6001 ZZ C36001 ZZ C3This bearingCT12 × 28 × 8200 pcson requestyou are here
    • Photo: 6001-2Z/C36001-2Z/C3SKF12 × 28 × 8available to order€2.42
    • Series illustration (not a photo of this item): 6001 ZZ C36001 ZZ C3FAG12 × 28 × 8available to orderon request
    • Photo: 6001 ZZ C36001 ZZ C3TIMKEN12 × 28 × 8out of stockon request
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø28, seal 12×28

    5 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø28CT SEG 28 W by 1000Why it fits: DIN 472 snap ring for a 28 bore: holds the outer ring in the housing
      €26.862 pcs
    • Seal 12×28JULU 012-28-7 TCWhy it fits: Oil seal 12×28: shaft 12 and housing bore 28, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.18100 pcs
    • Seal 12×28SOG Oil seal 12x28x7Why it fits: Oil seal 12×28: shaft 12 and housing bore 28, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 1 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 28d 12B 8
    d×D×Bsize 12 × 28 × 8mm
    Cdynamic 5.4kN
    C0static 2.36kN
    mweight 0.022kg

    Deep groove ball bearing 6001-ZZ C3, design ZZ: metal shields on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet