+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.20 per piece.
6001 2RS · 12 × 28 × 8

Deep groove ball · 6001 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6001 2RS: ⌀12 × ⌀28 × 8 mm6001 2RS2RS
    Fig. 1: 6001 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6001 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6001 2RS

    €0.24per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    14 exact, 32 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    28 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    8 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    5.07 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.36 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.022 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 12 × 28 × 8 from other brands

    48 products
    Series illustration (not a photo of this item): 6001 2RS
    You are viewingCT 6001 2RS
    €0.24baseline for the price comparison

    Everything the number specifies matches: series 60, 12 × 28 × 8 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6001 2RS6001 2RSThis bearingCT12 × 28 × 8available to order€0.24you are here
    • Series illustration (not a photo of this item): 6001 2NSE6001 2NSENACHI12 × 28 × 8275 pcs€2.18+€1.94
    • Series illustration (not a photo of this item): 6001 2RS6001 2RSKoyo12 × 28 × 8178 pcs€2.58+€2.34
    • Photo: 6001-2RSH6001-2RSHSKF12 × 28 × 84,021 pcs€2.60+€2.36
    • Photo: 6001 2RS6001 2RSKLT12 × 28 × 8available to order€0.24same price
    • Series illustration (not a photo of this item): 6001 2RS6001 2RSNTE12 × 28 × 8available to order€0.35+€0.11
    • Photo: 6001 2RS6001 2RSWBW12 × 28 × 8available to order€0.57+€0.33
    • Photo: 6001 2RS6001 2RSZ&S12 × 28 × 8available to order€0.57+€0.33
    • Photo: 6001 2RS6001 2RSF&D12 × 28 × 8available to order€0.94+€0.70
    • Photo: 6001 2RS6001 2RSTIMKEN12 × 28 × 8available to order€4.14+€3.90

    Under the price: the difference from the price of this bearing (€0.24).
    02

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø28, seal 12×28

    5 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø28CT SEG 28 W by 1000Why it fits: DIN 472 snap ring for a 28 bore: holds the outer ring in the housing
      €26.862 pcs
    • Seal 12×28JULU 012-28-7 TCWhy it fits: Oil seal 12×28: shaft 12 and housing bore 28, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.18100 pcs
    • Seal 12×28SOG Oil seal 12x28x7Why it fits: Oil seal 12×28: shaft 12 and housing bore 28, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 1 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180101) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 28d 12B 8
    d×D×Bsize 12 × 28 × 8mm
    Cdynamic 5.07kN
    C0static 2.36kN
    mweight 0.022kg

    Deep groove ball bearing 6001-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180101.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180101?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0101 corresponds to the ISO base 6001. Size 12 × 28 × 8 mm, a full equivalent of 6001-2RS.

    Will 6001 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet