+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
5207 2RS · 35 × 72 × 27

Deep groove ball · 5207 2RS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 5207 2RS: ⌀35 × ⌀72 × 27 mm⌀72⌀35275207 2RS2RS
    Fig. 1: 5207 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 5207 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 5207 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 25 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    40 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    28 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.44 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 27 from other brands

    30 products
    Series illustration (not a photo of this item): 5207 2RS
    You are viewingCT 5207 2RS

    Everything the number specifies matches: series 52, 35 × 72 × 27 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 5207 2RS5207 2RSThis bearingCT35 × 72 × 27available to orderon requestyou are here
    • Series illustration (not a photo of this item): 5207 2RS5207 2RSNTE35 × 72 × 278 pcs€6.30
    • Series illustration (not a photo of this item): 5207 2RS5207 2RSKoyo35 × 72 × 2730 pcs€31.42
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 72d 35B 27
    d×D×Bsize 35 × 72 × 27mm
    Cdynamic 40kN
    C0static 28kN
    mweight 0.44kg

    Deep groove ball bearing 5207-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet