+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
50304 · 20 × 52 × 15

Deep groove ball · 50304 (6304N)

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 50304 (6304N): ⌀20 × ⌀52 × 15 mm⌀52⌀201550304 (6304N)
    Fig. 1: 50304 (6304N), simplified drawing per ISO 8826-1; GOST number = ISO 6304 N, dimensions from the GOST↔ISO table CX p.782. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 50304

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 50304

    Supplier’s set and note: (6304N)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    0 exact, 52 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    15 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 52 × 15 from other brands

    53 products
    Cross-section drawing to size: Deep groove ball, 20 × 52 × 15 mm
    You are viewingCT 50304

    Same size, different design: the difference is written in the row.

    • Photo: 6304 2RS6304 2RScontact seals on both sides, standard designCT20 × 52 × 15902 pcs€0.82
    • Drawing: SS 6304 2RSSS 6304 2RScontact seals on both sides, stainless steelCT20 × 52 × 15965 pcs€2.94
    • Series illustration (not a photo of this item): 6304 2NSE C36304 2NSE C3contact seals on both sides, clearance C3, standard designNACHI20 × 52 × 1589 pcs€3.87
    • Series illustration (not a photo of this item): 6304 2NSE6304 2NSEcontact seals on both sides, standard designNACHI20 × 52 × 15100 pcs€3.91
    • Series illustration (not a photo of this item): 6304 2RS6304 2RScontact seals on both sides, standard designKoyo20 × 52 × 15334 pcs€4.63
    • Series illustration (not a photo of this item): 6304 2RS C36304 2RS C3contact seals on both sides, clearance C3, standard designKoyo20 × 52 × 15130 pcs€4.63
    • Series illustration (not a photo of this item): 6304-2RSH6304-2RSHcontact seals on both sides, standard designSKF20 × 52 × 153,066 pcs€5.22
    • Type diagram, no dimensions: ball6304 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN20 × 52 × ?10 pcs€5.54
    • Drawing: 6304 LLUC3/5K6304 LLUC3/5Kcontact seals on both sides, clearance C3, 5KNTN20 × 52 × 1546 pcs€5.58
    • Series illustration (not a photo of this item): 6304 2RS C36304 2RS C3contact seals on both sides, clearance C3, standard designno brand20 × 52 × 15available to order€0.79
    02

    Often bought with this

    seal 20×52, shaft snap ring Ø20, bore snap ring Ø52

    6 products
    • Seal 20×52JULU 020-52-10 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.392,570 pcs
    • Seal 20×52JULU 020-52-7 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.391,300 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 52d 20B 15
    d×D×Bsize 20 × 52 × 15mm

    Deep groove ball bearing 6304. Under GOST the same bearing is designated 304.

    Frequently asked questions

    What is 304?

    It is the same bearing under GOST 3189-89: 304 corresponds to the ISO base 6304. Size 20 × 52 × 15 mm, a full equivalent of 6304.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet