+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.34 per piece.
4202 2RS · 15 × 35 × 14

Deep groove ball · 4202 2RS

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 4202 2RS: ⌀15 × ⌀35 × 14 mm⌀35⌀15144202 2RS2RS
    Fig. 1: 4202 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 4202 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 4202 2RS

    €1.62per piece incl. VAT
    In stock: 757 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 7 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    11.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.059 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 15 × 35 × 14 from other brands

    9 products
    Cross-section drawing to size: Deep groove ball, 15 × 35 × 14 mm
    You are viewingCT 4202 2RS
    €1.62baseline for the price comparison

    Everything the number specifies matches: series 42, 15 × 35 × 14 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Deep groove ball, 15 × 35 × 14 mm4202 2RSThis bearingCT15 × 35 × 14757 pcs€1.62you are here
    • Cross-section drawing to size: Deep groove ball, 15 × 35 × 14 mm4202 -2RSZEN15 × 35 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€1.62).
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø35, seal 15×35

    5 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 15×35JULU 015-35-7 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.211,290 pcs
    • Seal 15×35JULU 015-35-10 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.24available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 15B 14
    d×D×Bsize 15 × 35 × 14mm
    Cdynamic 11.9kN
    C0static 7.5kN
    mweight 0.059kg

    Deep groove ball bearing 4202-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet