+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.47 per piece.
33208 · 40 × 80 × 32

Tapered roller · 33208

at an angle — high, on one side
    Drawing of 33208: ⌀40 × ⌀80 × 32 mm⌀80⌀40B 32T 32C 25α33208
    Fig. 1: 33208, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 33208

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 33208

    €5.41per piece incl. VAT
    In stock: 170 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 2 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    32 mm
    Width BRing width. Source: supplier data
    T
    32 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    Cup width C
    25 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    C
    105 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    132 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.77 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 32 from other brands

    7 products
    Series illustration (not a photo of this item): 33208
    You are viewingCT 33208
    €5.41baseline for the price comparison

    Everything the number specifies matches: series 332, 40 × 80 × 32 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3320833208This bearingCT40 × 80 × 32170 pcs€5.41you are here
    • Series illustration (not a photo of this item): 3320833208no brand40 × 80 × 32available to orderon request
    • Series illustration (not a photo of this item): 3320833208IBB40 × 80 × 32available to orderon request
    • Series illustration (not a photo of this item): 3320833208NTE40 × 80 × 32available to orderon request

    Under the price: the difference from the price of this bearing (€5.41).
    02

    Often bought with this

    seal 40×80, shaft snap ring Ø40, bore snap ring Ø80

    6 products
    • Seal 40×80JULU 040-80-7 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.53770 pcs
    • Seal 40×80JULU 040-80-10 TCWhy it fits: Oil seal 40×80: shaft 40 and housing bore 80, the same as the bearing
      €0.54463 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 40 × 80 × 32mm
    Cdynamic 105kN
    C0static 132kN
    mweight 0.77kg

    Tapered roller bearing 33208.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet