+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.00 per piece.
3307 2RS · 35 × 80 × 34.9

Angular contact ball · 3307 2RS

at an angle — medium, on both sides
    Drawing of 3307 2RS: ⌀35 × ⌀80 × 34.9 mm⌀80⌀3534.93307 2RS2RS
    Fig. 1: 3307 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3307 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT Malaysia 3307 2RS

    €6.05per piece incl. VAT
    In stock: 193 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    6 exact, 24 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    34.9 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    C
    52 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    35.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.73 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 80 × 34.9 from other brands

    32 products
    Series illustration (not a photo of this item): 3307 2RS
    You are viewingCT 3307 2RS
    €6.05baseline for the price comparison

    Everything the number specifies matches: series 33, 35 × 80 × 34.9 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3307 2RS3307 2RSThis bearingCT35 × 80 × 34.9193 pcs€6.05you are here
    • Photo: 3307 2RS3307 2RSZ&S35 × 80 × 34.9available to order€14.81+€8.76
    • Series illustration (not a photo of this item): 3307 2RS3307 2RSno brand35 × 80 × 34.9available to orderon request
    • Series illustration (not a photo of this item): 3307 2RS3307 2RSKG35 × 80 × 34.9available to orderon request
    • Series illustration (not a photo of this item): 3307 2RS3307 2RSNTE35 × 80 × 34.9available to orderon request
    • Series illustration (not a photo of this item): 3307-2RSR3307-2RSRNTE35 × 80 × 34.9available to orderon request

    Under the price: the difference from the price of this bearing (€6.05).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø80, seal 35×80

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 35B 34.9
    d×D×Bsize 35 × 80 × 34.9mm
    Cdynamic 52kN
    C0static 35.5kN
    mweight 0.73kg

    Angular contact ball bearing 3307-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 3307 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet