+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.92 per piece.
3306 2RS · 30 × 72 × 30.2

Angular contact ball · 3306 2RS

at an angle — medium, on both sides
    Drawing of 3306 2RS: ⌀30 × ⌀72 × 30.2 mm⌀72⌀3030.23306 2RS2RS
    Fig. 1: 3306 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 3306 2RS

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT Malaysia 3306 2RS

    €4.74per piece incl. VAT
    In stock: 300 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    8 exact, 18 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    30.2 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    C
    41.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    27.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.52 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 72 × 30.2 from other brands

    27 products
    Series illustration (not a photo of this item): 3306 2RS
    You are viewingCT 3306 2RS
    €4.74baseline for the price comparison

    Everything the number specifies matches: series 33, 30 × 72 × 30.2 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3306 2RS3306 2RSThis bearingCT30 × 72 × 30.2300 pcs€4.74you are here
    • Series illustration (not a photo of this item): 3306 2RS3306 2RSno brand30 × 72 × 30.2available to orderon request
    • Series illustration (not a photo of this item): 3306 2RS3306 2RSCX30 × 72 × 30.2out of stockon request
    • Series illustration (not a photo of this item): 3306 2RS3306 2RSKBS30 × 72 × 30.2out of stockon request
    • Series illustration (not a photo of this item): 3306 2RS3306 2RSKG30 × 72 × 30.2available to orderon request
    • Series illustration (not a photo of this item): 3306 2RS3306 2RSMTM30 × 72 × 30.2available to orderon request
    • Series illustration (not a photo of this item): 3306-2RSR3306-2RSRNTE30 × 72 × 30.2available to orderon request
    • Photo: 3306 2RS3306 2RSZ&S30 × 72 × 30.2out of stockon request

    Under the price: the difference from the price of this bearing (€4.74).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Horsch Tiger 6 AS (from 2011) Horsch check the version 2 assemblies

      not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: HORSCH Spare Parts Catalog (Quanos SIS.one), content language ru

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 72d 30B 30.2
    d×D×Bsize 30 × 72 × 30.2mm
    Cdynamic 41.5kN
    C0static 27.5kN
    mweight 0.52kg

    Angular contact ball bearing 3306-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet