+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.59 per piece.
32205 · 25 × 52 × 19.25

Tapered roller · 32205

at an angle — high, on one side
    Drawing of 32205: ⌀25 × ⌀52 × 19.25 mm⌀52⌀25T 19.25α32205
    Fig. 1: 32205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32205

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 32205

    €1.92per piece incl. VAT
    In stock: 63 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 1 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    T
    19.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    C
    35.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    44 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.19 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 19.25 from other brands

    7 products
    Series illustration (not a photo of this item): 32205
    You are viewingCT 32205
    €1.92baseline for the price comparison

    Everything the number specifies matches: series 322, 25 × 52 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 3220532205This bearingCT25 × 52 × ?63 pcs€1.92you are here
    • Series illustration (not a photo of this item): 3220532205NTE25 × 52 × ?48 pcs€2.72+€0.80
    • Photo: 3220532205WBW25 × 52 × 18available to order€3.99+€2.07
    • Series illustration (not a photo of this item): 3220532205no brand25 × 52 × ?available to orderon request
    • Photo: 3220532205AWB25 × 52 × 18out of stockon request
    • Photo: 3220532205Z&S25 × 52 × 18out of stockon request

    Under the price: the difference from the price of this bearing (€1.92).
    02

    Often bought with this

    seal 25×52, shaft snap ring Ø25, bore snap ring Ø52

    6 products
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.397,720 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 25 × 52 × 19.25mm
    Cdynamic 35.8kN
    C0static 44kN
    mweight 0.19kg

    Tapered roller bearing 32205.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet