+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.17 per piece.
32014 · 70 × 110 × 25

Tapered roller · 32014 single box

at an angle — high, on one side
    Drawing of 32014 single box: ⌀70 × ⌀110 × 25 mm⌀110⌀70B 25T 25C 19α32014 single box
    Fig. 1: 32014 single box, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32014

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 32014

    €3.84per piece incl. VAT
    In stock: 92 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 4 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    25 mm
    Width BRing width. Source: supplier data
    T
    25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    19 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 70 × 110 × 25 from other brands

    11 products
    Series illustration (not a photo of this item): 32014 single box
    You are viewingCT 32014
    €3.84baseline for the price comparison

    Everything the number specifies matches: series 320, 70 × 110 × 25 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 32014 single box32014 single boxThis bearingCT70 × 110 × 2592 pcs€3.84you are here
    • Series illustration (not a photo of this item): 3201432014CT70 × 110 × 255 pcs€3.84same price
    • Series illustration (not a photo of this item): 3201432014NTE70 × 110 × 2518 pcs€6.72+€2.88
    • Series illustration (not a photo of this item): 3201432014no brand70 × 110 × 25available to orderon request
    • Series illustration (not a photo of this item): 3201432014DYZV70 × 110 × 25available to orderon request

    Under the price: the difference from the price of this bearing (€3.84).
    02

    Often bought with this

    seal 70×110, shaft snap ring Ø70, bore snap ring Ø110

    4 products
    • Seal 70×110JULU 070-110-10 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €0.97330 pcs
    • Seal 70×110JULU 070-110-12 TCWhy it fits: Oil seal 70×110: shaft 70 and housing bore 110, the same as the bearing
      €1.05180 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. Kristall 9/​400 Lemken check the version 1 assembly · 2 pcs per machine

      the machine has X; ours does not; not decoded: suffix of our number “SINGLE BOX”

      manufacturer’s catalogue: Ersatzteilliste /​ Varaosakirja Lemken Kristall 9/​400 (Art.Nr./​Stck./​Artikeltext DE-EN)

    2. Maschio Cobra SC Maschio Gaspardo check the version 1 assembly

      not decoded: suffix of our number “SINGLE BOX”

      manufacturer’s catalogue: maschio_cobra-sc

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 70 × 110 × 25mm

    Tapered roller bearing 32014.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet