+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
27307 · 35 × 80 × 22.75

Tapered roller · 27307 (31307)

at an angle — high, on one side
    Drawing of 27307 (31307): ⌀35 × ⌀80 × 22.75 mm⌀80⌀35T 22.75C 18α27307 (31307)
    Fig. 1: 27307 (31307), end view and section; internal parts simplified per ISO 8826-1; GOST number = ISO 31307, dimensions from the GOST↔ISO table CX p.770. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 27307

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 27307

    Supplier’s set and note: (31307)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 11 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    22.75 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    18 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 35 × 80 × 22.75 from other brands

    17 products
    Cross-section drawing to size: Tapered roller, 35 × 80 × T 22.75 mm
    You are viewingCT 27307

    Everything the number specifies matches: series 273, 35 × 80 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Tapered roller, 35 × 80 × T 22.75 mm27307 (31307)This bearingCT35 × 80 × ?available to orderon requestyou are here
    • Series illustration (not a photo of this item): 3130731307CT35 × 80 × ?64 pcs€4.20
    • Series illustration (not a photo of this item): 3130731307NTE35 × 80 × ?125 pcs€5.34
    • Series illustration (not a photo of this item): 3130731307no brand35 × 80 × ?available to orderon request
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 35 × 80 × 22.75mm

    Tapered roller bearing 31307. Under GOST the same bearing is designated 27307.

    Frequently asked questions

    What is 27307?

    It is the same bearing under GOST 3189-89: 27307 corresponds to the ISO base 31307. Size 35 × 80 × 22.75 mm, a full equivalent of 31307.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet