+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €31.70 per piece.
22316 CA/W33 · 80 × 170 × 58

Spherical roller · 22316 CA/W33

radial — highaxial — medium, on both sides
    Drawing of 22316 CA/W33: ⌀80 × ⌀170 × 58 mm⌀170⌀805822316 CA/W33
    Fig. 1: 22316 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22316 CA/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing CT 22316 CA/W33

    €38.36per piece incl. VAT
    In stock: 131 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 21 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    58 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    385 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 58 from other brands

    23 products
    Series illustration (not a photo of this item): 22316 CA/W33
    You are viewingCT 22316 CA/W33
    €38.36baseline for the price comparison

    Everything the number specifies matches: series 223, 80 × 170 × 58 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 22316 CA/W3322316 CA/W33This bearingCT80 × 170 × 58131 pcs€38.36you are here
    • Series illustration (not a photo of this item): 22316 CAW3322316 CAW33NTE80 × 170 × 588 pcs€54.30+€15.94

    Under the price: the difference from the price of this bearing (€38.36).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 58mm
    Cdynamic 385kN

    Spherical roller bearing 22316. Under GOST the same bearing is designated 53616.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53616?

    It is the same bearing under GOST 3189-89: 53616 corresponds to the ISO base 22316. Size 80 × 170 × 58 mm, a full equivalent of 22316.

    Will 22316 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet