+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22311 C/W33 · 55 × 120 × 43

Spherical roller · 22311 C/W33

radial — highaxial — medium, on both sides
    Drawing of 22311 C/W33: ⌀55 × ⌀120 × 43 mm⌀120⌀554322311 C/W33
    Fig. 1: 22311 C/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22311 C/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing CT 22311 C/W33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 24 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    43 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    208 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 55 × 120 × 43 from other brands

    28 products
    Series illustration (not a photo of this item): 22311 C/W33
    You are viewingCT 22311 C/W33

    Everything the number specifies matches: series 223, 55 × 120 × 43 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 22311 C/W3322311 C/W33This bearingCT55 × 120 × 43available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22311 CW3322311 CW33KG55 × 120 × 43available to orderon request
    • Photo: 22311 CC W3322311 CC W33Z&S55 × 120 × 43out of stockon request
    02

    Often bought with this

    shaft snap ring Ø55, bore snap ring Ø120

    2 products
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 120 × 43mm
    Cdynamic 208kN

    Spherical roller bearing 22311. Under GOST the same bearing is designated 53611.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 53611?

    It is the same bearing under GOST 3189-89: 53611 corresponds to the ISO base 22311. Size 55 × 120 × 43 mm, a full equivalent of 22311.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet