+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.44 per piece.
2204 2RS · 20 × 47 × 18

Self-aligning ball · 2204 2RS

radial — mediumaxial — low, on both sides
    Drawing of 2204 2RS: ⌀20 × ⌀47 × 18 mm⌀47⌀20182204 2RS2RS
    Fig. 1: 2204 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2204 2RS

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT 2204 2RS

    €1.74per piece incl. VAT
    In stock: 584 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 11 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    12.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.4 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.14 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 20 × 47 × 18 from other brands

    15 products
    Series illustration (not a photo of this item): 2204 2RS
    You are viewingCT 2204 2RS
    €1.74baseline for the price comparison

    Everything the number specifies matches: series 22, 20 × 47 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 2204 2RS2204 2RSThis bearingCT20 × 47 × 18584 pcs€1.74you are here
    • Photo: 2204 2RS2204 2RSZ&S20 × 47 × 18available to order€4.09+€2.35
    • Series illustration (not a photo of this item): 2204 2RS2204 2RSno brand20 × 47 × 18available to orderon request

    Under the price: the difference from the price of this bearing (€1.74).
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 20 × 47 × 18mm
    Cdynamic 12.7kN
    C0static 3.4kN
    mweight 0.14kg

    Self-aligning ball bearing 2204-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet