+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2180120 · 100 × 150 × 30

Deep groove ball · 2180120

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 2180120: ⌀100 × ⌀150 × 30 mm⌀150⌀1003021801202RS
    Fig. 1: 2180120, simplified drawing per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.768. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2180120

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 2180120

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    30 mm
    Width BRing width. Source: supplier data
    Seal
    contact seals on both sides
    Clearance
    normal clearance
    01

    Often bought with this

    bore snap ring Ø150, seal 100×150

    3 products
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    • Seal 100×150JULU 100-150-12 TCWhy it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (on both sides), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    • Seal 100×150NEU 100x150x12Why it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing; the bearing has its own seals (on both sides), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    02

    Details

    what this bearing is, questions

    About the bearing

    D 150d 100B 30
    d×D×Bsize 100 × 150 × 30mm

    Deep groove ball bearing 2180120, design : contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet