+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2097752 M · 260 × 440 × 225

Tapered roller · 2097752 M

at an angle — high, on one side
    Drawing of 2097752 M: ⌀260 × ⌀440 × 225 mm⌀440⌀260T 225C 180α2097752 M
    Fig. 1: 2097752 M, end view and section; internal parts simplified per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.768. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2097752 M

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 2097752 M

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 0 approximate
    d
    260 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    440 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    225 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    180 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 260 × 440 × 225 from other brands

    2 products
    Cross-section drawing to size: Tapered roller, 260 × 440 × T 225 mm
    You are viewingCT 2097752 M

    Everything the number specifies matches: series 20977, 260 × 440 mm, special design. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Tapered roller, 260 × 440 × T 225 mm2097752 MThis bearingCT260 × 440 × ?available to orderon requestyou are here
    • Type diagram, no dimensions: bearing2097752MSPZ-GROUP260 × 440 × ?available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 260 × 440 × 225mm

    Tapered roller bearing 2097752.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet