+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
201 · 12 × 32 × 10

Deep groove ball · 201 (6201)

radial — mediumaxial — low, on both sides
    Drawing of 201 (6201): ⌀12 × ⌀32 × 10 mm201 (6201)
    Fig. 1: 201 (6201), end view and section; rolling element geometry per the NSK catalogue; GOST number = ISO 6201, dimensions from the GOST↔ISO table CX p.767. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 201

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 201

    Supplier’s set and note: (6201)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 56 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 12 × 32 × 10 from other brands

    63 products
    Drawing: 201 (6201)
    You are viewingCT 201

    Everything the number specifies matches: series 2, 12 × 32 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 62016201CT12 × 32 × 10220 pcs€0.31
    • Photo: 62016201GPZ12 × 32 × 10available to order€0.79
    • Photo: 62016201NEU12 × 32 × 10available to order€0.82
    • Photo: 62016201SKF12 × 32 × 10available to order€1.91
    • Series illustration (not a photo of this item): 62016201KG12 × 32 × 10available to orderon request
    • Series illustration (not a photo of this item): 62016201NTE12 × 32 × 10available to orderon request
    02

    Often bought with this

    seal 12×32, shaft snap ring Ø12, bore snap ring Ø32

    4 products
    • Seal 12×32JULU 012-32-7 TCWhy it fits: Oil seal 12×32: shaft 12 and housing bore 32, the same as the bearing
      €0.211,410 pcs
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 12B 10
    d×D×Bsize 12 × 32 × 10mm

    Deep groove ball bearing 6201. Under GOST the same bearing is designated 201.

    Frequently asked questions

    What is 201?

    It is the same bearing under GOST 3189-89: 201 corresponds to the ISO base 6201. Size 12 × 32 × 10 mm, a full equivalent of 6201.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet