+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
180106 · 30 × 55 × 13

Deep groove ball · 180106 (6006 2RSC3)

radial — mediumaxial — low, on both sides
    Drawing of 180106 (6006 2RSC3): ⌀30 × ⌀55 × 13 mm180106 (6006 2RSC3)2RS
    Fig. 1: 180106 (6006 2RSC3), end view and section; rolling element geometry per the NSK catalogue; GOST number = ISO 6006 2RS, dimensions from the GOST↔ISO table CX p.766. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 180106

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 180106

    Supplier’s set and note: (6006 2RSC3)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    9 exact, 50 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    C3
    01

    Equivalents

    the same size 30 × 55 × 13 from other brands

    60 products
    Drawing: 180106 (6006 2RSC3)
    You are viewingCT 180106

    Everything the number specifies matches: series 60, 30 × 55 × 13 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Drawing: 180106 (6006 2RSC3)180106 (6006 2RSC3)This bearingCT30 × 55 × 13available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6006 2RS C36006 2RS C3Koyo30 × 55 × 13100 pcs€4.63
    • Photo: 6006.2RSR.C36006.2RSR.C3FAG30 × 55 × 13300 pcs€4.92
    • Photo: 6006-2RS1/C36006-2RS1/C3SKF30 × 55 × 13485 pcs€5.22
    • Photo: 6006 2RS C36006 2RS C3FKL30 × 55 × 13available to order€3.94
    • Photo: 6006 2RS C36006 2RS C3TIMKEN30 × 55 × 13available to order€7.43
    • Series illustration (not a photo of this item): 6006 2RSC36006 2RSC3KG30 × 55 × 13available to orderon request
    • Series illustration (not a photo of this item): 6006 2 NSE C36006 2 NSE C3NACHI30 × 55 × 13available to orderon request
    • Series illustration (not a photo of this item): 6006 2RSC36006 2RSC3NTE30 × 55 × 13available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø55, seal 30×55

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.40180 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 55d 30B 13
    d×D×Bsize 30 × 55 × 13mm

    Deep groove ball bearing 6006-2RS C3, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet