+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.12 per piece.
160703 · 17 × 62 × 20

Deep groove ball · 160703

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 160703: ⌀17 × ⌀62 × 20 mm⌀62⌀1720160703RS
    Fig. 1: 160703, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 160703

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 160703

    €2.57per piece incl. VAT
    In stock: 49 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 0 approximate
    d
    17 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    Seal
    contact seal on one side
    Clearance
    normal clearance
    01

    Equivalents

    the same size 17 × 62 × 20 from other brands

    3 products
    Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm
    You are viewingCT 160703
    €2.57baseline for the price comparison

    Everything the number specifies matches: series 1607, 17 × 62 × 20 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703This bearingCT17 × 62 × 2049 pcs€2.57you are here
    • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703NTE17 × 62 × 20available to orderon request

    Under the price: the difference from the price of this bearing (€2.57).
    02

    Often bought with this

    shaft snap ring Ø17, bore snap ring Ø62

    3 products
    • Shaft snap ring Ø17CT SEG 17 Z by1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      €11.51available to order
    • Shaft snap ring Ø17SEG 17 Z by 1000Why it fits: DIN 471 snap ring for a 17 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 17B 20
    d×D×Bsize 17 × 62 × 20mm

    Deep groove ball bearing 160703, design : contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet