+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €7.68 per piece.
16020 · 100 × 150 × 16

Deep groove ball · 16020

radial — mediumaxial — low, on both sides
    Drawing of 16020: ⌀100 × ⌀150 × 16 mm16020
    Fig. 1: 16020, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16020

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16020

    €9.29per piece incl. VAT
    In stock: 12 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 1 approximate
    d
    100 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    46.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    44 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.91 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 100 × 150 × 16 from other brands

    2 products
    Series illustration (not a photo of this item): 16020
    You are viewingCT 16020
    €9.29baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 16020/C316020/C3clearance C3SKF100 × 150 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€9.29).
    02

    Often bought with this

    seal 100×150, bore snap ring Ø150

    3 products
    • Seal 100×150JULU 100-150-12 TCWhy it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing
      Price to be confirmedavailable to order
    • Seal 100×150NEU 100x150x12Why it fits: Oil seal 100×150: shaft 100 and housing bore 150, the same as the bearing
      Price to be confirmedavailable to order
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 150d 100B 16
    d×D×Bsize 100 × 150 × 16mm
    Cdynamic 46.2kN
    C0static 44kN
    mweight 0.91kg

    Deep groove ball bearing 16020. Under GOST the same bearing is designated 7000120.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000120?

    It is the same bearing under GOST 3189-89: 7000120 corresponds to the ISO base 16020. Size 100 × 150 × 16 mm, a full equivalent of 16020.

    Will 16020 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet