+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.90 per piece.
16019 · 95 × 145 × 16

Deep groove ball · 16019

radial — mediumaxial — low, on both sides
    Drawing of 16019: ⌀95 × ⌀145 × 16 mm16019
    Fig. 1: 16019, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16019

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16019

    €8.35per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 0 approximate
    d
    95 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    145 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    44.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    41.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.89 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 95 × 145 × 16 from other brands

    2 products
    Series illustration (not a photo of this item): 16019
    You are viewingCT 16019
    €8.35baseline for the price comparison

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1601916019This bearingCT95 × 145 × 16available to order€8.35you are here
    • Series illustration (not a photo of this item): 1601916019SKF95 × 145 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€8.35).
    02

    Often bought with this

    seal 95×145, bore snap ring Ø145

    2 products
    • Seal 95×145JULU 095-145-13 TCWhy it fits: Oil seal 95×145: shaft 95 and housing bore 145, the same as the bearing
      €1.66500 pcs
    • Bore snap ring Ø145CT SEG 145 W by 100Why it fits: DIN 472 snap ring for a 145 bore: holds the outer ring in the housing
      €86.473 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 145d 95B 16
    d×D×Bsize 95 × 145 × 16mm
    Cdynamic 44.8kN
    C0static 41.5kN
    mweight 0.89kg

    Deep groove ball bearing 16019.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet