+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.35 per piece.
16015 · 75 × 115 × 13

Deep groove ball · 16015

radial — mediumaxial — low, on both sides
    Drawing of 16015: ⌀75 × ⌀115 × 13 mm16015
    Fig. 1: 16015, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16015

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16015

    €4.05per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 0 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    115 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    13 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    30.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    27 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.46 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 115 × 13 from other brands

    2 products
    Series illustration (not a photo of this item): 16015
    You are viewingCT 16015
    €4.05baseline for the price comparison

    Everything the number specifies matches: series 160, 75 × 115 × 13 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1601516015This bearingCT75 × 115 × 13available to order€4.05you are here
    • Series illustration (not a photo of this item): 1601516015FAG75 × 115 × 13out of stockon request

    Under the price: the difference from the price of this bearing (€4.05).
    02

    Often bought with this

    seal 75×115, bore snap ring Ø115

    2 products
    • Seal 75×115JULU 075-115-10 TCWhy it fits: Oil seal 75×115: shaft 75 and housing bore 115, the same as the bearing
      €1.08109 pcs
    • Bore snap ring Ø115CT SEG 115 W by 100Why it fits: DIN 472 snap ring for a 115 bore: holds the outer ring in the housing
      €61.771 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 115d 75B 13
    d×D×Bsize 75 × 115 × 13mm
    Cdynamic 30.2kN
    C0static 27kN
    mweight 0.46kg

    Deep groove ball bearing 16015. Under GOST the same bearing is designated 7000115.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000115?

    It is the same bearing under GOST 3189-89: 7000115 corresponds to the ISO base 16015. Size 75 × 115 × 13 mm, a full equivalent of 16015.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet