+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.54 per piece.
16013 2RS · 65 × 100 × 11

Deep groove ball · 16013 2RS

radial — mediumaxial — low, on both sides
    Drawing of 16013 2RS: ⌀65 × ⌀100 × 11 mm16013 2RS2RS
    Fig. 1: 16013 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16013 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16013 2RS

    €4.28per piece incl. VAT
    In stock: 97 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 4 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    22.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    16.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.3 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 100 × 11 from other brands

    5 products
    Drawing: 16013 2RS
    You are viewingCT 16013 2RS
    €4.28baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 1601316013open, no protectionCT65 × 100 × 11340 pcs€2.67−€1.61
    • Series illustration (not a photo of this item): 1601316013open, no protectionno brand65 × 100 × 11available to orderon request
    • Photo: 1601316013open, no protectionDKF65 × 100 × 11out of stockon request
    • Series illustration (not a photo of this item): 1601316013open, no protectionSKF65 × 100 × 11available to orderon request

    Under the price: the difference from the price of this bearing (€4.28).
    02

    Often bought with this

    shaft snap ring Ø65, bore snap ring Ø100, seal 65×100

    5 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 65×100JULU 065-100-10 TCWhy it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.93590 pcs
    • Seal 65×100XPS 65x100x10Why it fits: Oil seal 65×100: shaft 65 and housing bore 100, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €2.94available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 65B 11
    d×D×Bsize 65 × 100 × 11mm
    Cdynamic 22.5kN
    C0static 16.6kN
    mweight 0.3kg

    Deep groove ball bearing 16013-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet