+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.23 per piece.
16008 2RS · 40 × 68 × 9

Deep groove ball · 16008 2RS

radial — mediumaxial — low, on both sides
    Drawing of 16008 2RS: ⌀40 × ⌀68 × 9 mm16008 2RS2RS
    Fig. 1: 16008 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16008 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16008 2RS

    €1.49per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 7 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    68 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    13.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    9.15 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.13 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 68 × 9 from other brands

    9 products
    Drawing: 16008 2RS
    You are viewingCT 16008 2RS
    €1.49baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Photo: 1600816008open, no protectionDKF40 × 68 × 9available to order€5.61+€4.12
    • Photo: 1600816008open, no protectionSKF40 × 68 × 9available to order€11.79+€10.30
    • Series illustration (not a photo of this item): 1600816008open, no protectionFAG40 × 68 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600816008open, no protectionKG40 × 68 × 9available to orderon request
    • Drawing: 16008 516008 5open, no protection, 5NSK40 × 68 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600816008open, no protectionNTE40 × 68 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600816008open, no protectionURB40 × 68 × 9out of stockon request

    Under the price: the difference from the price of this bearing (€1.49).
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø68, seal 40×68

    5 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø68CT SEG 68 W by 100Why it fits: DIN 472 snap ring for a 68 bore: holds the outer ring in the housing
      €16.07available to order
    • Seal 40×68JULU 040-68-10 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.443,418 pcs
    • Seal 40×68JULU 040-68-7 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.44210 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 68d 40B 9
    d×D×Bsize 40 × 68 × 9mm
    Cdynamic 13.8kN
    C0static 9.15kN
    mweight 0.13kg

    Deep groove ball bearing 16008-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet