+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.07 per piece.
16007 ZZ · 35 × 62 × 9

Deep groove ball · 16007 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 16007 ZZ: ⌀35 × ⌀62 × 9 mm16007 ZZZZ
    Fig. 1: 16007 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16007 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16007 ZZ

    €1.29per piece incl. VAT
    In stock: 495 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 14 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    13 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    8.15 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.11 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 62 × 9 from other brands

    18 products
    Drawing: 16007 ZZ
    You are viewingCT 16007 ZZ
    €1.29baseline for the price comparison

    Everything the number specifies matches: series 160, 35 × 62 × 9 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Drawing: 16007 ZZ16007 ZZThis bearingCT35 × 62 × 9495 pcs€1.29you are here
    • Drawing: 16007 ZZ16007 ZZno brand35 × 62 × 9available to orderon request
    • Drawing: 16007 2Z16007 2ZZEN35 × 62 × 9available to orderon request

    Under the price: the difference from the price of this bearing (€1.29).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø62, seal 35×62

    5 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 35×62JULU 035-62-10 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.3918,510 pcs
    • Seal 35×62JULU 035-62-7 TCWhy it fits: Oil seal 35×62: shaft 35 and housing bore 62, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.441,561 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 62d 35B 9
    d×D×Bsize 35 × 62 × 9mm
    Cdynamic 13kN
    C0static 8.15kN
    mweight 0.11kg

    Deep groove ball bearing 16007-ZZ, design ZZ: metal shields on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet