+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1509 · 45 × 85 × 23

Deep groove ball · 1509 (2209)

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 1509 (2209): ⌀45 × ⌀85 × 23 mm⌀85⌀45231509 (2209)
    Fig. 1: 1509 (2209), simplified drawing per ISO 8826-1; GOST number = ISO 2209, dimensions from the GOST↔ISO table CX p.763. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1509

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 1509

    Supplier’s set and note: (2209)

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 17 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 85 × 23 from other brands

    19 products
    Cross-section drawing to size: Deep groove ball, 45 × 85 × 23 mm
    You are viewingCT 1509

    Everything the number specifies matches: series 15, 45 × 85 × 23 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 22092209no brand45 × 85 × 23available to orderon request
    02

    Often bought with this

    seal 45×85, shaft snap ring Ø45, bore snap ring Ø85

    4 products
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 85d 45B 23
    d×D×Bsize 45 × 85 × 23mm

    Deep groove ball bearing 2209. Under GOST the same bearing is designated 1509.

    Frequently asked questions

    What is 1509?

    It is the same bearing under GOST 3189-89: 1509 corresponds to the ISO base 2209. Size 45 × 85 × 23 mm, a full equivalent of 2209.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet