+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.34 per piece.
1307 K · 35 × 80 × 21

Self-aligning ball · 1307 K

radial — mediumaxial — low, on both sides
    Drawing of 1307 K: ⌀35 × ⌀80 × 21 mm⌀80⌀35211307 K
    Fig. 1: 1307 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1307 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT Malaysia 1307 K

    €2.83per piece incl. VAT
    In stock: 3 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 11 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 35 × 80 × 21 from other brands

    15 products
    Series illustration (not a photo of this item): 1307 K
    You are viewingCT 1307 K
    €2.83baseline for the price comparison

    Everything the number specifies matches: series 13, 35 × 80 × 21 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1307 K1307 KThis bearingCT35 × 80 × 213 pcs€2.83you are here
    • Series illustration (not a photo of this item): 1307 K1307 KNSK35 × 80 × 21available to orderon request

    Under the price: the difference from the price of this bearing (€2.83).
    02

    Often bought with this

    adapter sleeve H307, lock nut M35×1.5, lock washer MB07, bore snap ring Ø80

    8 products
    • Adapter sleeve H307CT H 307Why it fits: H307 for 1307 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      €1.4986 pcs
    • Adapter sleeve H307FAG H 307Why it fits: H307 for 1307 K: 1:12 taper, bore 35 for shaft 30 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M35×1.5KM 07Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.82available to order
    • Lock nut M35×1.5Z&S KM 7Why it fits: KM07 is the nut for sleeve H307: thread M35×1.5
      €0.98available to order
    • Lock washer MB07CT MB 07Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.106,655 pcs
    • Lock washer MB07NEU MB 7Why it fits: MB07 locks the KM07 nut (ISO 2982-2)
      €0.17available to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 80 × 21mm

    Self-aligning ball bearing 1307 K.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet