+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.88 per piece.
1211 K · 55 × 100 × 21

Self-aligning ball · 1211 K

radial — mediumaxial — low, on both sides
    Drawing of 1211 K: ⌀55 × ⌀100 × 21 mm⌀100⌀55211211 K
    Fig. 1: 1211 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1211 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT Malaysia 1211 K

    €3.48per piece incl. VAT
    In stock: 25 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 12 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    17 products
    Series illustration (not a photo of this item): 1211 K
    You are viewingCT 1211 K
    €3.48baseline for the price comparison

    Everything the number specifies matches: series 12, 55 × 100 × 21 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1211 K1211 KThis bearingCT55 × 100 × 2125 pcs€3.48you are here
    • Series illustration (not a photo of this item): 1211 K1211 Kno brand55 × 100 × 21available to orderon request

    Under the price: the difference from the price of this bearing (€3.48).
    02

    Often bought with this

    adapter sleeve H211, lock nut M55×2, lock washer MB11, bore snap ring Ø100, seal 50×100

    8 products
    • Adapter sleeve H211CT H 211 with black KMWhy it fits: H211 for 1211 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €1.66available to order
    • Adapter sleeve H211CT H 211.Why it fits: H211 for 1211 K: 1:12 taper, bore 55 for shaft 50 (Koyo, p. 65)
      €1.67available to order
    • Lock nut M55×2CT KM 11 SILVERWhy it fits: KM11 is the nut for sleeve H211: thread M55×2
      €1.11786 pcs
    • Lock nut M55×2KM 11Why it fits: KM11 is the nut for sleeve H211: thread M55×2
      Price to be confirmedavailable to order
    • Lock washer MB11CT MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      €0.29950 pcs
    • Lock washer MB11MB 11Why it fits: MB11 locks the KM11 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    • Seal 50×100JULU 050-100-10 TCWhy it fits: Oil seal 50×100: sleeve shaft 50, housing bore for the bearing 100; SN/SNL housings have their own seals, so check against the housing
      €0.98250 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 100 × 21mm

    Self-aligning ball bearing 1211 K. Under GOST the same bearing is designated 111211.

    Frequently asked questions

    What is 111211?

    It is the same bearing under GOST 3189-89: 111211 corresponds to the ISO base 1211 K. Size 55 × 100 × 21 mm, a full equivalent of 1211 K.

    Will 1211 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet