+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.42 per piece.
1209 · 45 × 85 × 19

Self-aligning ball · 1209

radial — mediumaxial — low, on both sides
    Drawing of 1209: ⌀45 × ⌀85 × 19 mm⌀85⌀45191209
    Fig. 1: 1209, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1209

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT 1209

    €2.93per piece incl. VAT
    In stock: 15 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 10 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    19 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    22.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.8 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.47 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 85 × 19 from other brands

    15 products
    Series illustration (not a photo of this item): 1209
    You are viewingCT 1209
    €2.93baseline for the price comparison

    Everything the number specifies matches: series 12, 45 × 85 × 19 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 12091209This bearingCT45 × 85 × 1915 pcs€2.93you are here
    • Series illustration (not a photo of this item): 12091209KG45 × 85 × 1935 pcs€4.05+€1.12
    • Photo: 12091209WBF45 × 85 × 19available to order€5+€2.07
    • Photo: 12091209Z&S45 × 85 × 19available to order€6.68+€3.75

    Under the price: the difference from the price of this bearing (€2.93).
    02

    Often bought with this

    seal 45×85, shaft snap ring Ø45, bore snap ring Ø85

    4 products
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ check the version 2 assemblies · 3 pcs per machine

      not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (111209) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 45 × 85 × 19mm
    Cdynamic 22.9kN
    C0static 7.8kN
    mweight 0.47kg

    Self-aligning ball bearing 1209. Under GOST the same bearing is designated 111209.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111209?

    It is the same bearing under GOST 3189-89: 111209 corresponds to the ISO base 1209. Size 45 × 85 × 19 mm, a full equivalent of 1209.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet