+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1000915 · 75 × 105 × 16

Deep groove ball · 1000915

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 1000915: ⌀75 × ⌀105 × 16 mm⌀105⌀75161000915
    Fig. 1: 1000915, simplified drawing per ISO 8826-1; GOST number = ISO 61915, dimensions from the GOST↔ISO table CX p.758. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1000915

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 1000915

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    105 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 75 × 105 × 16 from other brands

    10 products
    Cross-section drawing to size: Deep groove ball, 75 × 105 × 16 mm
    You are viewingCT 1000915

    Everything the number specifies matches: series 10009, 75 × 105 × 16 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Drawing: 6191561915CT75 × 105 × 16available to orderon request
    02

    Often bought with this

    seal 75×105, bore snap ring Ø105

    2 products
    • Seal 75×105JULU 075-105-10 TCWhy it fits: Oil seal 75×105: shaft 75 and housing bore 105, the same as the bearing
      €0.93available to order
    • Bore snap ring Ø105CT SEG 105 W by 100Why it fits: DIN 472 snap ring for a 105 bore: holds the outer ring in the housing
      €51.474 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 105d 75B 16
    d×D×Bsize 75 × 105 × 16mm

    Deep groove ball bearing 1000915.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet