+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
BECO
6306 BHTS ZZ C4 200° · 30 × 72

Deep groove ball · 6306 BHTS ZZ C4 200° · simplified: width not specified

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6306 BHTS ZZ C4 200°: ⌀30 × ⌀72 mm⌀72⌀306306 BHTS ZZ C4 200°ZZ
    Fig. 1: 6306 BHTS ZZ C4 200°, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6306 BHTS ZZ C4 200°

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing BECO 6306 BHTS ZZ C4 200°

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 79 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    C4
    01

    Equivalents

    the same size 30 × 72 from other brands

    81 products
    Type diagram, no dimensions: ball
    You are viewingBECO 6306 BHTS ZZ C4 200°

    Everything the number specifies matches: series 63, 30 × 72 mm, metal shields on both sides, clearance C4, special design. The codes in the number are read against the BECO catalogue.

    • Type diagram, no dimensions: ball6306 BHTS ZZ C4 200°This bearingBECO30 × 72 × ?available to orderon requestyou are here
    • Type diagram, no dimensions: ball6306-BHTS-ZZ-C4 (220°C-250°C)BECO30 × 72 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø72, seal 30×72

    6 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 30×72JULU 030-72-10 TCWhy it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.392,205 pcs
    • Seal 30×72SOG 100958N 30x72x10Why it fits: Oil seal 30×72: shaft 30 and housing bore 72, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines2 makesby parts catalogues

    1. T-156B-09-03 (tractor loader) KhTZ check the version 3 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has clearance C4; the machine takes normal (CN); ours has BHTS; not decoded: suffix of our number “200°”

      manufacturer’s catalogue: Tractor loader T-156B-09-03. Operator’s manual

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 3 assemblies · 3 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C4; the machine takes normal (CN); the machine has snap ring groove (N); ours does not; ours has BHTS; not decoded: mark “K” in the machine catalogue, suffix of our number “200°”

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 2 assemblies · 4 pcs per machine

      ours has clearance C4; the machine takes normal (CN); ours has BHTS; not decoded: suffix of our number “200°”; not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. KhTZ-16131, KhTZ-16331 KhTZ check the version 2 assemblies · 3 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C4; the machine takes normal (CN); ours has BHTS; not decoded: suffix of our number “200°”

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    5. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 2 assemblies · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; ours has clearance C4; the machine takes normal (CN); the machine has snap ring groove (N); ours does not; ours has BHTS; not decoded: mark “K” in the machine catalogue, suffix of our number “200°”

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 30 × 72mm

    Deep groove ball bearing 6306-ZZ C4, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet