+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
BECO
6206 BHTS ZZ 280° · 30 × 62

Deep groove ball · 6206 BHTS ZZ 280° · simplified: width not specified

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206 BHTS ZZ 280°: ⌀30 × ⌀62 mm⌀62⌀306206 BHTS ZZ 280°ZZ
    Fig. 1: 6206 BHTS ZZ 280°, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206 BHTS ZZ 280°

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing BECO 6206 BHTS ZZ 280°

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 83 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 62 from other brands

    91 products
    Type diagram, no dimensions: ball
    You are viewingBECO 6206 BHTS ZZ 280°

    Everything the number specifies matches: series 62, 30 × 62 mm, metal shields on both sides, normal clearance, special design. The codes in the number are read against the BECO catalogue.

    • Type diagram, no dimensions: ball6206 BHTS ZZ 280°This bearingBECO30 × 62 × ?available to orderon requestyou are here
    • Type diagram, no dimensions: ball6206 BHTS ZZ 350C°BECO30 × 62 × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn check the version 3 assemblies · 11 pcs per machine

      ours: shields on both sides (ZZ); in the machine: seals on both sides (2RS); ours has BHTS; not decoded: suffix of our number “280°”

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus check the version 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has BHTS; not decoded: suffix of our number “280°”

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has BHTS; not decoded: suffix of our number “280°”

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has BHTS; not decoded: suffix of our number “280°”

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours: shields on both sides (ZZ); in the machine: open; ours has BHTS; not decoded: suffix of our number “280°”

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (80206) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 30 × 62mm

    Deep groove ball bearing 6206-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80206.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80206?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0206 corresponds to the ISO base 6206. Size 30 × 62 mm, a full equivalent of 6206-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet