+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.57 per piece.
AWB
1208 K · 40 × 80 × 18

Self-aligning ball · 1208 K

radial — mediumaxial — low, on both sides
    Drawing of 1208 K: ⌀40 × ⌀80 × 18 mm⌀80⌀40181208 K
    Fig. 1: 1208 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1208 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing AWB 1208 K

    €4.32per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 20 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.42 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    28 products
    Photo: 1208 K
    You are viewingAWB 1208 K
    €4.32baseline for the price comparison

    Everything the number specifies matches: series 12, 40 × 80 × 18 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the AWB catalogue.

    • Photo: 1208 K1208 KThis bearingAWB40 × 80 × 18available to order€4.32you are here
    • Series illustration (not a photo of this item): 1208K1208KCT40 × 80 × 18available to order€1.82−€2.50
    • Series illustration (not a photo of this item): 1208 K1208 KKG40 × 80 × 18available to orderon request

    Under the price: the difference from the price of this bearing (€4.32).
    02

    Often bought with this

    adapter sleeve H208, lock nut M40×1.5, lock washer MB08, bore snap ring Ø80, seal 35×80

    8 products
    • Adapter sleeve H208CT H 208 with black KMWhy it fits: H208 for 1208 K: 1:12 taper, bore 40 for shaft 35 (Koyo, p. 65)
      €1.19100 pcs
    • Adapter sleeve H208Z&S H 208Why it fits: H208 for 1208 K: 1:12 taper, bore 40 for shaft 35 (Koyo, p. 65)
      €2.57available to order
    • Lock nut M40×1.5CT KM 08Why it fits: KM08 is the nut for sleeve H208: thread M40×1.5
      €0.86available to order
    • Lock nut M40×1.5Z&S KM 8Why it fits: KM08 is the nut for sleeve H208: thread M40×1.5
      €1.23available to order
    • Lock washer MB08CT MB 08Why it fits: MB08 locks the KM08 nut (ISO 2982-2)
      €0.173,038 pcs
    • Lock washer MB08MTM MB08Why it fits: MB08 locks the KM08 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: sleeve shaft 35, housing bore for the bearing 80; SN/SNL housings have their own seals, so check against the housing
      €0.53250 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 80 × 18mm
    mweight 0.42kg

    Self-aligning ball bearing 1208 K. Under GOST the same bearing is designated 111208.

    M: AWB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111208?

    It is the same bearing under GOST 3189-89: 111208 corresponds to the ISO base 1208 K. Size 40 × 80 × 18 mm, a full equivalent of 1208 K.

    Will 1208 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet