+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6405 2RS · 25 × 80 × 21

Deep groove ball · 6405 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6405 2RS: ⌀25 × ⌀80 × 21 mm6405 2RS2RS
    Fig. 1: 6405 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6405 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6405 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 8 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 25 × 80 × 21 from other brands

    12 products
    Drawing: 6405 2RS
    You are viewing6405 2RS

    Everything the number specifies matches: series 64, 25 × 80 × 21 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Drawing: 6405 2RS6405 2RSThis bearingno brand25 × 80 × 21available to orderon requestyou are here
    • Drawing: 6405 2RS6405 2RSCT25 × 80 × 211,002 pcs€3.73
    • Drawing: 6405 2RS6405 2RSNAF25 × 80 × 21available to orderon request
    • Drawing: 6405 2RS6405 2RSZEN25 × 80 × 21available to orderon request
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø80

    4 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 80d 25B 21
    d×D×Bsize 25 × 80 × 21mm

    Deep groove ball bearing 6405-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180405.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180405?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0405 corresponds to the ISO base 6405. Size 25 × 80 × 21 mm, a full equivalent of 6405-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet