+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6210 2RS · 50 × 90 × 20

Deep groove ball · 6210 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6210 2RS: ⌀50 × ⌀90 × 20 mm6210 2RS2RS
    Fig. 1: 6210 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6210 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6210 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    10 exact, 66 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    20 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    77 products
    Series illustration (not a photo of this item): 6210 2RS
    You are viewing6210 2RS

    Everything the number specifies matches: series 62, 50 × 90 × 20 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 6210 2RS6210 2RSThis bearingno brand50 × 90 × 20available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6210 2RS6210 2RSCT50 × 90 × 209,968 pcs€2.14
    • Series illustration (not a photo of this item): 6210 2RS6210 2RSNTE50 × 90 × 20739 pcs€3.94
    • Photo: 6210 2RS6210 2RSKLT50 × 90 × 20available to order€2.14
    • Photo: 6210 2RS6210 2RSZ&S50 × 90 × 20available to order€5.47
    • Photo: 6210-2RS16210-2RS1SKF50 × 90 × 20available to order€16.37
    • Series illustration (not a photo of this item): 6210 2RS6210 2RSDSK50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): 6210 2RS6210 2RSFersa50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): 6210 2RS6210 2RSKG50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): 6210 2NSE6210 2NSENACHI50 × 90 × 20available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø90, seal 50×90

    5 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.73280 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    18 machines3 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus exactly this number 2 assemblies · 5 pcs per machine

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 8 assemblies · 11 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 7 assemblies · 10 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. Belarus 922.3/​922.4 Belarus same geometry 6 assemblies · 8 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: shield on one side

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    5. Belarus 1523/​1523V/​1523.3 Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180210) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 50B 20
    d×D×Bsize 50 × 90 × 20mm

    Deep groove ball bearing 6210-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180210.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180210?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210-2RS.

    Will 6210 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet