+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6204 2RS SS · 20 × 47 × 14

Deep groove ball · 6204 2RS SS

radial — mediumaxial — low, on both sides
    Drawing of 6204 2RS SS: ⌀20 × ⌀47 × 14 mm6204 2RS SS2RS
    Fig. 1: 6204 2RS SS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6204 2RS SS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6204 2RS SS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 107 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    14 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    118 products
    Drawing: 6204 2RS SS
    You are viewing6204 2RS SS

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, contact seals on both sides, normal clearance, stainless steel.

    • Drawing: 6204 2RS SS6204 2RS SSThis bearingno brand20 × 47 × 14available to orderon requestyou are here
    • Drawing: SS 6204-2RSSS 6204-2RSCT20 × 47 × 141,420 pcs€2.21
    • Photo: W 6204-2RS1W 6204-2RS1SKF20 × 47 × 14available to order€23.74
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    11 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 4 assemblies · 6 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has SS

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Gaspardo Primavera (pneumatic seed drill) Maschio Gaspardo same geometry 4 assemblies

      ours has SS

      manufacturer’s catalogue: maschio_primavera-2009

    3. VBP 2160 (baler) Kuhn same geometry 2 assemblies · 5 pcs per machine

      ours has SS

      manufacturer’s catalogue: kuhn_vbp-2160

    4. Belarus-152 Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open; ours has SS

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 3 pcs per machine

      the machine has A; ours does not; the machine has S17; ours does not; ours is P0; the machine takes P6; ours has SS

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm

    Deep groove ball bearing 6204-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6204 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet