+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6202 ZZ · 15 × 35 × 11

Deep groove ball · 6202 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6202 ZZ: ⌀15 × ⌀35 × 11 mm6202 ZZZZ
    Fig. 1: 6202 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6202 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6202 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    11 exact, 83 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    11 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 35 × 11 from other brands

    100 products
    Series illustration (not a photo of this item): 6202 ZZ
    You are viewing6202 ZZ

    Everything the number specifies matches: series 62, 15 × 35 × 11 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZThis bearingno brand15 × 35 × 11available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZCT15 × 35 × 1114,970 pcs€0.39
    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZNTE15 × 35 × 111,463 pcs€0.51
    • Photo: 6202-2Z6202-2ZSKF15 × 35 × 11available to order€2.35
    • Photo: 6202 ZZ6202 ZZFAG15 × 35 × 11available to order€5.52
    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZGPZ15 × 35 × 11out of stockon request
    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZISB15 × 35 × 11available to orderon request
    • Series illustration (not a photo of this item): 6202 ZZ6202 ZZKG15 × 35 × 11available to orderon request
    • Photo: 6202 ZZ6202 ZZKLT15 × 35 × 11out of stockon request
    • Series illustration (not a photo of this item): 6202ZZE6202ZZENACHI15 × 35 × 11available to orderon request
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø35, seal 15×35

    5 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 15×35JULU 015-35-7 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.211,290 pcs
    • Seal 15×35JULU 015-35-10 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.24available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 15B 11
    d×D×Bsize 15 × 35 × 11mm

    Deep groove ball bearing 6202-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80202.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80202?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0202 corresponds to the ISO base 6202. Size 15 × 35 × 11 mm, a full equivalent of 6202-ZZ.

    Will 6202 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet