+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61906 2RS SS · 30 × 47 × 9

Deep groove ball · 61906 2RS SS

radial — mediumaxial — low, on both sides
    Drawing of 61906 2RS SS: ⌀30 × ⌀47 × 9 mm61906 2RS SS2RS
    Fig. 1: 61906 2RS SS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61906 2RS SS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 61906 2RS SS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 17 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 47 × 9 from other brands

    20 products
    Drawing: 61906 2RS SS
    You are viewing61906 2RS SS

    Everything the number specifies matches: series 619, 30 × 47 × 9 mm, contact seals on both sides, normal clearance, stainless steel.

    • Drawing: 61906 2RS SS61906 2RS SSThis bearingno brand30 × 47 × 9available to orderon requestyou are here
    • Drawing: SS 6906 / 61906 2RSSS 6906 / 61906 2RSCT30 × 47 × 985 pcs€1.95
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø47, seal 30×47

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 30×47JULU 030-47-8 TCWhy it fits: Oil seal 30×47: shaft 30 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.25100 pcs
    • Seal 30×47JULU 030-47-10 TCWhy it fits: Oil seal 30×47: shaft 30 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.29760 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 30B 9
    d×D×Bsize 30 × 47 × 9mm

    Deep groove ball bearing 61906-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet