+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
619/8 ZZ · 8 × 19 × 6

Deep groove ball · 619/8 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 619/8 ZZ: ⌀8 × ⌀19 × 6 mm619/8 ZZZZ
    Fig. 1: 619/8 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 619/8 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 619/8 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 11 approximate
    d
    8 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    19 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    6 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 8 × 19 × 6 from other brands

    16 products
    Series illustration (not a photo of this item): 619/8 ZZ
    You are viewing619/8 ZZ

    Everything the number specifies matches: series 619, 8 × 19 × 6 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 619/8 ZZ619/8 ZZThis bearingno brand8 × 19 × 6available to orderon requestyou are here
    • Series illustration (not a photo of this item): 698 / 619/8 ZZ698 / 619/8 ZZCT8 × 19 × 6available to order€0.28
    • Series illustration (not a photo of this item): 698 ZZ698 ZZCT8 × 19 × 6available to order€0.28
    • Series illustration (not a photo of this item): 698 ZZ698 ZZKG8 × 19 × 6available to orderon request
    • Series illustration (not a photo of this item): 619/8-2Z619/8-2ZSKF8 × 19 × 6available to orderon request
    02

    Often bought with this

    shaft snap ring Ø8, bore snap ring Ø19

    2 products
    • Shaft snap ring Ø8CT SEG 8 Z by1000Why it fits: DIN 471 snap ring for a 8 shaft: holds the inner ring on the shaft
      €5.55available to order
    • Bore snap ring Ø19CT SEG 19 W by 1000Why it fits: DIN 472 snap ring for a 19 bore: holds the outer ring in the housing
      €10.711 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 19d 8B 6
    d×D×Bsize 8 × 19 × 6mm

    Deep groove ball bearing 619/8-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 619/8 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet