+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
619/5 2Z · 5 × 13 × 4

Deep groove ball · 619/5 2Z

radial — mediumaxial — low, on both sides
    Drawing of 619/5 2Z: ⌀5 × ⌀13 × 4 mm619/5 2Z2Z
    Fig. 1: 619/5 2Z, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 619/5 2Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 619/5 2Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    7 exact, 3 approximate
    d
    5 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    13 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    4 mm
    Width BRing width. Source: supplier data
    Seal
    2Zmetal shields on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 5 × 13 × 4 from other brands

    11 products
    Series illustration (not a photo of this item): 619/5 2Z
    You are viewing619/5 2Z

    Everything the number specifies matches: series 619, 5 × 13 × 4 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 619/5 2Z619/5 2ZThis bearingno brand5 × 13 × 4available to orderon requestyou are here
    • Series illustration (not a photo of this item): 695 / 619/5 ZZ695 / 619/5 ZZCT5 × 13 × 41,910 pcs€0.25
    • Photo: 619/5-2Z619/5-2ZSKF5 × 13 × 4available to order€7.19
    • Series illustration (not a photo of this item): 695 ZZ695 ZZCT5 × 13 × 4available to orderon request
    • Series illustration (not a photo of this item): 695 ZZ695 ZZIBB5 × 13 × 4available to orderon request
    • Series illustration (not a photo of this item): 695 ZZ695 ZZKG5 × 13 × 4available to orderon request
    • Series illustration (not a photo of this item): 695 ZZ695 ZZMGK5 × 13 × 4available to orderon request
    02

    Often bought with this

    shaft snap ring Ø5, bore snap ring Ø13

    2 products
    • Shaft snap ring Ø5CT SEG 5 Z by1000Why it fits: DIN 471 snap ring for a 5 shaft: holds the inner ring on the shaft
      €5.512 pcs
    • Bore snap ring Ø13CT SEG 13 W by 1000Why it fits: DIN 472 snap ring for a 13 bore: holds the outer ring in the housing
      €7.2211 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; not set by the number: clearance, precision class

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 2 pcs per machine

      ours: shields on both sides (ZZ); in the machine: open; not set by the number: clearance, precision class

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 13d 5B 4
    d×D×Bsize 5 × 13 × 4mm

    Deep groove ball bearing 619/5-ZZ, design 2Z: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet