+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.41 per piece.

There are no dimensions in the data, so no drawing is built.

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing 619/3 2Z

€0.50per piece incl. VAT
In stock: 30 pcs
In the cart

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 2 approximate
d
3 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
8 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
3 mm
Width BRing width. Source: two supplier sources
Seal
2Zmetal shields on both sides
Clearance
normal clearance
01

Equivalents

the same size 3 × 8 × 3 from other brands

7 products
Series illustration (not a photo of this item): 619/3 2Z
You are viewing619/3 2Z
€0.50baseline for the price comparison

Everything the number specifies matches: series 619, 3 × 8 × 3 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters.

  • Series illustration (not a photo of this item): 619/3 2Z619/3 2ZThis bearingno brand3 × 8 × 330 pcs€0.50you are here
  • Series illustration (not a photo of this item): 693 / 619/3 ZZ693 / 619/3 ZZCT3 × 8 × 48,569 pcs€0.29−€0.21

Under the price: the difference from the price of this bearing (€0.50).
02

Often bought with this

shaft snap ring Ø3, bore snap ring Ø8

2 products
  • Shaft snap ring Ø3CT SEG 3 Z by1000Why it fits: DIN 471 snap ring for a 3 shaft: holds the inner ring on the shaft
    €5.41out of stock
  • Bore snap ring Ø8CT SEG 8 W by 1000Why it fits: DIN 472 snap ring for a 8 bore: holds the outer ring in the housing
    €5.771 pcs
03

Details

what this bearing is, questions

About the bearing

D 8d 3B 3
d×D×Bsize 3 × 8 × 3mm

Deep groove ball bearing 619/3-ZZ, design 2Z: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

04

Reviews

No reviews yet