+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61810 2RS · 50 × 65 × 7

Deep groove ball · 61810 2RS

radial — mediumaxial — low, on both sides
    Drawing of 61810 2RS: ⌀50 × ⌀65 × 7 mm61810 2RS2RS
    Fig. 1: 61810 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61810 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 61810 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 5 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    65 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    7 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 65 × 7 from other brands

    9 products
    Series illustration (not a photo of this item): 61810 2RS
    You are viewing61810 2RS

    Everything the number specifies matches: series 618, 50 × 65 × 7 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 61810 2RS61810 2RSThis bearingno brand50 × 65 × 7available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6810 / 61810 2RS6810 / 61810 2RSCT50 × 65 × 7599 pcs€1.88
    • Series illustration (not a photo of this item): 61810 2RS61810 2RSCT50 × 65 × 7available to orderon request
    • Series illustration (not a photo of this item): 61810-2RS161810-2RS1SKF50 × 65 × 7available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50, bore snap ring Ø65, seal 50×65

    5 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø65CT SEG 65 W by 100Why it fits: DIN 472 snap ring for a 65 bore: holds the outer ring in the housing
      €15.238 pcs
    • Seal 50×65JULU 050-65-8 TCWhy it fits: Oil seal 50×65: shaft 50 and housing bore 65, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.3980 pcs
    • Seal 50×65JULU 050-65-10 TCWhy it fits: Oil seal 50×65: shaft 50 and housing bore 65, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.44130 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 65d 50B 7
    d×D×Bsize 50 × 65 × 7mm

    Deep groove ball bearing 61810-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet